MSI m620 Mode D'Emploi

 

 

62 

 

You can connect a mouse to your computer through the PS2 

port or USB port.  If there is no PS port available on your 

computer, but you only have mouse of PS2 connector, please 

purchase a USB connector first.    To connect the mouse: 

1. 

Turn on the computer and install the mouse driver. 

2. 

Connect your mouse to the computer. 

3. 

The computer may auto detect your mouse driver and 

enable the mouse function.  If there is no detection of 

you mouse you can manually enable the mouse by going 

to Start Menu 

Æ Control Panel Æ Add Hardware to add 

the new device. 

 

If your printer has a USB interface, you can then use the USB 

port on the computer to connect the printer.  The following 

instruction describes the general procedure to connect a printer: 

1. 

Turn off the computer. 

2. 

Connect one end of the printer cable to the computer’s 

USB port and the other end to the printer. 

3. 

Connect the power cord and turn on the printer. 

4. 

Turn on the computer and the system will detect a new 

device.    Install the required driver. 

For further instructions, please refer to your printer’s manual.