DELL 2000 Guide De Référence

$ "

#  

When you disconnect a cable, pull on its connector or on its strain-relief loop, not 
on the cable itself. As you pull out the connector, keep it evenly aligned to avoid 
bending any connector pins. Also, before you connect a cable make sure both 
connectors are correctly oriented and aligned.

Handle components with care. Hold a component such as a memory module by 
its edges, not its pins.

Before you clean your computer, turn it off, unplug it from its power source, and 
remove the battery pack(s). 

Clean your computer with a soft cloth dampened with water rather than with    
liquid or aerosol cleaners.

Clean the display with a soft, clean cloth and commercial window cleaner that 
does not contain wax or abrasives. Apply the cleaner to the cloth; then stroke the 
cloth across the display in one direction, moving from the top of the display to the 
bottom. If the display contains grease or some other contaminant, use isopropyl 
alcohol instead of commercial window cleaner.

If your computer gets wet or is damaged, follow the procedures described in 
Chapter 3, “Basic Troubleshooting.” If, after following these procedures, you  
confirm that your computer is not operating properly, contact Dell Computer   
Corporation. (See Chapter 5, “Getting Help,” for the appropriate telephone 
number.)

) 

* #

#