ZyXEL P-660HW-T3 v2 Manuel D’Utilisation

P-660HW-T v2 Quick Start Guide

3

2 ETHERNET: Use an Ethernet cable to connect a computer to an ETHERNET port for initial configuration 

and/or Internet access.

3 POWER: Use the power adaptor provided with your P-660HW-T v2 to connect an appropriate power 

source to the POWER socket. Make sure the power source is on.

4 Push in the POWER button. Look at the lights on the front panel.
• The POWER light blinks while your P-660HW-T v2 starts up and stays on once it is ready. The DSL light is on 

when the P-660HW-T v2 has a DSL connection, and the WLAN light is on when the wireless LAN is ready. The  
INTERNET light is on when you are able to access the Internet and blinks when the P-660HW-T v2 is sending 
or receiving data.

• Each ETHERNET light stays on if the corresponding ETHERNET port is properly connected and blinks when 

there is traffic.

If any of these lights are not on, check your connections, and inspect your cables for damage. If the lights are 
still off, contact your local vendor.

1 In your browser, go to 

http://192.168.1.1.

2 Enter the default password user to go 

directly to the Status screen.
If your browser cannot find this screen, 
check its security settings. See 
Troubleshooting for details.