ZyXEL p-334wh Mode D'Emploi

P-334WH User’s Guide

106 

Chapter 7 WiFi WAN

Figure 57   WiFi WAN > WiFi 

The following table describes the general wireless LAN labels in this screen.

Table 39   WiFi WAN > WiFi

Enable 

Wireless

Click the check box to activate WiFi WAN.

To associate 

with any 

available WiFi 

network

Select this option to have the ZyXEL Device connect to any available wireless 

network within range.

User Defined 

SSID

Select this option to have the ZyXEL Device connect to a wireless network with the 

SSID you specified in the Name (SSID) field.

Name(SSID)

The SSID (Service Set IDentity) identifies the Service Set with which the ZyXEL 

Device will associate. The ZyXEL Device and the access point (AP) must have the 

same SSID. 
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless 

network with which the ZyXEL Device will associate. Alternatively, you can double-

click an SSID in the text box below to select that network.

Scan

Click this button to have the ZyXEL Device search for available wireless network 

within transmission range. The SSID and signal strength are then displayed in the text 

box above.

Security Mode

Use the same security settings as those on the AP with which you want to associate.

Note: The ZyXEL Device in WiFi WAN Router mode supports only 

WEP encryption, WPA-PSK or WPA2-PSK.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to reload the previous configuration for this screen.