ZyXEL p-334wh Mode D'Emploi

P-334WH User’s Guide

56 

Chapter 3 Connection Wizard

Figure 18   Wizard Step 2: Wireless LAN

The following table describes the labels in this screen.

Table 14   Wizard Step 2: Wireless LAN

Name(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless 

LAN. 
If you change this field on the ZyXEL Device, make sure all wireless stations use the 

same SSID in order to access the network. 

Security

Select a Security level from the drop-down list box.
Choose Auto to have the ZyXEL Device generate a pre-shared key automatically. A 

screen pops up displaying the generated pre-shared key after you click Next. Click OK 

to continue. 
Choose None to have no wireless LAN security configured. If you do not enable any 

wireless security on your ZyXEL Device, your network is accessible to any wireless 

networking device that is within range. If you choose this option, skip directly to 

Choose Basic security if you want to configure WEP Encryption parameters. If you 

choose this option, go directly to 

Choose Extend (WPA-PSK or WPA2-PSK) security to configure a Pre-Shared Key. 

Choose this option only if your wireless clients support WPA-PSK or WPA2-PSK 

respectively. If you choose this option, skip directly to 

. 

Channel 

Selection

The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a 

channel. 
This field displays Auto which means the ZyXEL Device automatically scans for and 

selects a channel which is not used by a nearby device.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.

Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID 

and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is 
enabled) or WPA2-PSK (if WPA2-PSK is enabled) for wireless communication.