ZyXEL p-334wh Mode D'Emploi
P-334WH User’s Guide
Chapter 2 Introducing the Web Configurator
51
Figure 12 Summary: Packet Statistics (Router Mode)
The following table describes the labels in this screen.
Table 11 Summary: Packet Statistics
LABEL
DESCRIPTION
Port
This is the ZyXEL Device’s port type.
Status
For the LAN ports, this displays the port speed and duplex setting or Down when
the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using
For the WAN port, it displays the port speed and duplex setting if you’re using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This
field displays Down when the line is disconnected.
For the WLAN or WiFi WAN, it displays the maximum transmission rate when the
For the WLAN or WiFi WAN, it displays the maximum transmission rate when the
WLAN or WiFi WAN is enabled and Down when the WLAN or WiFi WAN is
disabled.
TxPkts
This is the number of transmitted packets on this port.
RxPkts
This is the number of received packets on this port.
Collisions
This is the number of collisions on this port.
Tx B/s
This displays the transmission speed in bytes per second on this port.
Rx B/s
This displays the reception speed in bytes per second on this port.
Up Time
This is the total amount of time the line has been up.
System Up Time
This is the total time the ZyXEL Device has been on.
Poll Interval(s)
Enter the time interval for refreshing statistics in this field.
Set Interval
Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Stop
Click Stop to stop refreshing statistics, click Stop.
2.4.8 Summary: Wireless Station Status
Click the WLAN Station Status (Details...) hyperlink in the Status screen. View the wireless
stations that are currently associated to the ZyXEL Device in the Association List screen.
stations that are currently associated to the ZyXEL Device in the Association List screen.