ZyXEL nbg-5715 Mode D'Emploi
Chapter 11 Wireless LAN
NBG5715 User’s Guide
89
To change your NBG5715’s MAC filter settings, click Network > Wireless LAN 2.4G/5G > MAC
Filter. The screen appears as shown.
Filter. The screen appears as shown.
Figure 47
Network > Wireless LAN 2.4G/5G > MAC Filter
The following table describes the labels in this menu.
Table 32
Network > Wireless LAN 2.4G/5G > MAC Filter
LABEL
DESCRIPTION
MAC Address
Filter
Filter
Select to turn on (Enable) or off (Disable) MAC address filtering.
Filter Action
Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
This field is configurable only when you select Enable in the MAC Address Filter
field.
This field is configurable only when you select Enable in the MAC Address Filter
field.
Select Allow to permit access to the NBG5715, MAC addresses not listed will be
denied access to the NBG5715.
denied access to the NBG5715.
Select Deny to block access to the NBG5715, MAC addresses not listed will be
allowed to access the NBG5715.
allowed to access the NBG5715.
MAC Filter Summary
Set
This is the index number of the MAC address.
MAC Address
Enter the MAC address of the wireless station that are allowed or denied access to
the NBG5715.
the NBG5715.
Apply
Click Apply to save your changes back to the NBG5715.
Cancel
Click Cancel to reload the previous configuration for this screen.