ZyXEL nbg-5715 Mode D'Emploi
NBG5715 User’s Guide
115
C
H A P T E R
1 6
Static Route
16.1 Overview
This chapter shows you how to configure static routes for your NBG5715.
Each remote node specifies only the network to which the gateway is directly connected, and the
NBG5715 has no knowledge of the networks beyond. For instance, the NBG5715 knows about
network N2 in the following figure through remote node Router 1. However, the NBG5715 is unable
to route a packet to network N3 because it doesn't know that there is a route through the same
remote node Router 1 (via gateway Router 2). The static routes are for you to tell the NBG5715
about the networks beyond the remote nodes.
NBG5715 has no knowledge of the networks beyond. For instance, the NBG5715 knows about
network N2 in the following figure through remote node Router 1. However, the NBG5715 is unable
to route a packet to network N3 because it doesn't know that there is a route through the same
remote node Router 1 (via gateway Router 2). The static routes are for you to tell the NBG5715
about the networks beyond the remote nodes.
Figure 69
Example of Static Routing Topology
16.2 The Static Route Screen
Click Network > Static Route to open the Static Route screen.
Figure 70
Network > Static Route