Sharp MX-2300N Mode D'Emploi

Page de 843
44
Staple sort function / Saddle stitch function
The staple sort function sorts output into sets, staples each set, and delivers the sets to the tray. The saddle stitch 
function staples each set in 2 places at the centerline and folds the stapled set.
The relations between the stapling positions, paper orientation, permitted paper sizes for stapling, and number of sheets 
that can be stapled are shown below.
For original placement orientations, see "
" (page 
45).
* Two 56 lbs. (209 g/m
2
) sheets can be inserted as covers and stapled (only 1 sheet when saddle stitch is used). When this is done, 
the number of sheets that can be used is two less (one less for saddle stitch) than the stated maximum.
Stapling positions
Vertically-oriented paper
Horizontally-oriented paper
1 staple at top left corner
Applicable paper sizes
8-1/2" x 11", A4, B5, 16K
Number of sheets that can be 
stapled:
• Saddle stitch finisher
Max. 30 sheets*
• Finisher
Max. 50 sheets*
• Saddle stitch finisher
Applicable paper sizes
11" x 17", 8-1/2" x 14", 
8-1/2" x 13", 8-1/2" x 11"R, 
A3, B4, A4R, B5R, 8K, 16KR
Number of sheets that can 
be stapled
11" x 17", 8-1/2" x 14", 
8-1/2" x 13", A3, B4, 8K:
Max. 25 sheets*
8-1/2" x 11"R, A4R, B5R, 
16KR:
Max. 30 sheets*
• Finisher
Applicable paper sizes
11" x 17", 8-1/2" x 14", 
8-1/2" x 13", 8-1/2" x 11"R, 
A3, B4, A4R, 8K, 16KR
Number of sheets that can 
be stapled
11" x 17", 8-1/2" x 14", 
8-1/2" x 13", A3, B4, 8K:
Max. 30 sheets*
8-1/2" x 11"R, A4R, 16KR:
Max. 50 sheets*
1 staple at bottom left 
corner
2 staples at left edge
Saddle stitch (only with 
saddle stitch finisher)
Saddle stitch cannot be used 
when the paper is oriented 
vertically
Applicable paper sizes
11" x 17", 8-1/2" x 11"R, A3, B4, 
A4R
Number of sheets that can be 
stapled:
Max. 10 sheets*
• When Mixed Size Original in the special modes is used with the "Same Width" setting, the maximum number of sheets that 
can be stapled is 25 for a saddle stitch finisher or 30 for a finisher regardless of the paper size.
• The saddle stitch function can only be used when a saddle stitch finisher is installed.
4
5
Saddle stitch