Sharp MX-5500N Mode D’Emploi

When transmitting an image that is one of the following 
sizes, this function rotates the image counterclockwise 
90 degrees. (The setting can be configured separately 
for each size.)
8-1/2 x 11", 5-1/2" x 8-1/2"R, A4, B5R, A5R, 16K

When the transmitted image is printed by the receiving 
machine, the page number can be added to the top of 
each printed page.

I-Fax Receive Settings are described below.

When a fax is received that includes printed information 
such as the sender's name and address, the received image 
is slightly larger than the standard size. This setting is used 
to automatically reduce the image to fit the standard size.

This is used to select whether or not received faxes are 
printed on both sides of the paper.
When this setting is enabled and a fax consisting of 2 or 
more pages is received (the pages must be the same 
size), the pages are printed on both sides of the paper.

When the machine is unable to print a received fax, the 
fax can be forwarded to another machine. This setting is 
used to configure the address of the other machine.
Enter the forwarding address (maximum of 64 characters).

When an A3 size fax is received, this function reduces 
the fax to W letter size.

The duration of time the machine waits until stopping 
reception when a response is not received from the mail 
server (POP3 server) can be set from 30 to 300 seconds 
in increments of 30 seconds.

8-1/2"x11"R and A4R size images are not rotated.

• If Auto Receive Reduce is disabled, the edges of 

the image outside the standard size will be cut off. 
However, the image will be clearer because it will 
be printed at the same size as the original.

• Standard sizes are sizes such as 8-1/2" x 11" and 

8-1/2" x 5-1/2" (A4 and B5).

Multiple forwarding addresses cannot be stored.

When this setting is enabled, W letter size faxes are 
also reduced.