Sharp MX-M260 Manuel D’Utilisation
72
SENDING AN IMAGE
BASIC TRANSMISSION METHOD
1
Make sure the machine is in scanner
mode.
mode.
When the [SCAN] key
light is on, the machine is
in scanner mode. If the
light is not on, press the
[SCAN] key.
If user authentication is
enabled, you must log in.
(p.69)
light is on, the machine is
in scanner mode. If the
light is not on, press the
[SCAN] key.
If user authentication is
enabled, you must log in.
(p.69)
2
Load the original.
For detailed information
on loading an original,
refer to the operation
manual for copier.
on loading an original,
refer to the operation
manual for copier.
3
Check the original size that appears in
the top half of the [ORIGINAL] key.
the top half of the [ORIGINAL] key.
The original size is
automatically detected.
If you loaded a
non-standard size
document or wish to
change the scanning size,
touch the [ORIGINAL] key
and set the document
size. (Refer to page 78.)
automatically detected.
If you loaded a
non-standard size
document or wish to
change the scanning size,
touch the [ORIGINAL] key
and set the document
size. (Refer to page 78.)
4
Adjust the quality setting. (p.79)
The factory default
settings are:
settings are:
• Image quality:
TEXT/PHOTO
• Density: AUTO
5
Adjust the resolution setting. (p.80)
The factory default
setting is "300dpi".
setting is "300dpi".
6
Select the file format. (p.81)
The factory default
settings are:
settings are:
• FILE TYPE: TIFF
• COMPRESSION MODE:
• COMPRESSION MODE:
MMR (G4)
• PAGES PER FILE: ALL
7
Touch the [ADDRESS BOOK] key.
The address book screen
appears.
appears.
You cannot load documents in both the
RSPF and on the document glass and send
them in a single transmission. If documents
are loaded in both the RSPF and on the
document glass, only the document in the
RSPF will be scanned and transmitted.
RSPF and on the document glass and send
them in a single transmission. If documents
are loaded in both the RSPF and on the
document glass, only the document in the
RSPF will be scanned and transmitted.
• To scan a two-sided original (when an RSPF
is installed), refer to page 76.
• If you are scanning a large number of
originals (and the RSPF is installed), follow
the procedure on page 77.
the procedure on page 77.
• To rotate the document image 90° before
transmission, see page 78.
JOB STATUS
COPY
PRINT
SCAN
FAX
ON LINE
DATA
DATA
DATA
LINE
DATA
DATA
SYSTEM SETTINGS
Note
AUTO 8½X11
ORIGINAL
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
Note
AUTO
8½X11
300dpi
RESOLUTION
QUALITY
TIFF-G4
AUTO
FILE FORMAT
AUTO 8½X11
ORIGINAL
300dpi
RESOLUTION
QUALITY
TIFF-G4
FILE FORMAT
AUTO 8½X11
ORIGINAL
300dpi
RESOLUTION
QUALITY
TIFF-G4
FILE FORMAT
ADDRESS
BOOK
ADDRESS ENTRY
ADDRESS REVIEW
SEND SETTINGS
MX-M310.book 72 ページ 2009年7月6日 月曜日 午後6時57分