Amana ADB1000AW Manuel D’Utilisation

Check “Electrical Requirements” section.

You need to:

■

have the correct electrical supply and recommended 
grounding method.

If you are:

■

direct wiring, use Option 1

■

using a power supply cord, use Option 2

1. Route direct wire so that it does not touch dishwasher motor 

or lower part of dishwasher tub.

2. Pull direct wire through hole in terminal box.

■

Select the proper size twist-on 
connectors to connect your 
household wiring to 16-gauge 
dishwasher wiring.

■

Insert wire ends into twist-on 
connector. Do not pre-twist bare wire.

■

Twist connector.

■

Gently tug on wires to be sure both are secured.

3. Connect the wires as follows using twist-on connectors sized 

to connect direct wire to 16-gauge dishwasher wire:

4. Form bare ground wire into a U-shaped hook. Wrap ground 

wire hook clockwise around ground connector and under the 
washer.

5. Securely tighten ground connector.

6. Tighten clamp connector or 

conduit connector screws.

7. Reinstall terminal box cover 

with wires inside terminal box.

The cover must be outside the box 
on the left side.

8. Make sure no wires are pinched by 

cover.

1. Route the power supply cord so that it does not touch 

dishwasher motor or lower part of dishwasher tub.

2. Pull the direct wire through hole in terminal box.

■

Select the proper size twist-on 
connectors to connect your 
household wiring to 16-gauge 
dishwasher wiring.

■

Insert wire ends into UL Listed/CSA 
Approved twist-on connector. Do not 
pre-twist bare wire.

■

Twist connector.

■

Gently tug on wires to be sure both are secured.

Ground wire Washer

Ground

connector

Ground wire

Screws