Boston Acoustics dx pro Manuel De Montage

Suspended Ceiling Installation:
1. Remove ceiling tile at desired location.
2. Center Bracket Frame within 2’ dimension

on ceiling tile.

3. Using Outer Flange (C) as a template, trace 

cutout hole.  Cut tile so that Outer Flange fits
into cutout hole.

4. Attach Bracket Wings to DXB Bracket Frame

as previously described.  Make certain that 
Wing Extensions (H) remain intact.

5. Install Bracket above the ceiling tile so that 

the weight of the assembly is supported by 
the ceiling grid.  Check local codes and ceil-
ing specifications to determine whether 
additional support is required.

6. Remove speaker grille (see page 7, #3 in DX

Pro manual)

7. Using the 8 supplied screws, attach the DX 

Pro speaker to the DXB bracket.  Do not 
over tighten screws.

8. Replace grille.

042-001068-0

5. Finished wall surfaces must align with Outer 

Flange (C) as shown.

6. Remove speaker grille (see page 7, #3 in DX

Pro manual)

7. Using the 8 supplied screws, attach the DX 

Pro speaker to the DXB bracket.  Do not 
over tighten screws.

8. Replace grille.