Brother MFC-P2000 Guide D’Installation Rapide
- 9 -
Printing a Test Sample Page
We recommend that you print a test page. Refer to the instructions below.
✒
Note
The following test page operation will be invalid after the machine has received any data
from your computer.
of the On-line User’s Guide.
Press the control panel
switch
.
The machine will start printing a test
sample page.
sample page.
✒
Note
The machine can also print settings, fonts,
and hexadecimal values of received data.
For more information, see “Test Print
Mode” in
and hexadecimal values of received data.
For more information, see “Test Print
Mode” in
of the On-line User’s
Guide.
✒
Note
TROUBLESHOOTING,
Q & A” of the On-line Users Guide. If you are still unable to print a test sample page after
reviewing the information in the Users Guide, consult your dealer.
reviewing the information in the Users Guide, consult your dealer.
After printing the test sample page, you are ready to prepare your computer to work with the
machine. The software setup varies depending upon your computer and operating system.
Refer to the relevant following section:
machine. The software setup varies depending upon your computer and operating system.
Refer to the relevant following section:
Action 7-1: Installation from CD-ROM
Action 7-2: Prepare the Printer Driver and the Scanner Driver for the Machine
Action 7-3: Prepare DOS for the Machine from floppy disk
Action 7-2: Prepare the Printer Driver and the Scanner Driver for the Machine
Action 7-3: Prepare DOS for the Machine from floppy disk