Argox pt-10 Manuel D’Utilisation
14
How to charge Argox rechargeable battery pack in the cradle
1.
Make sure that the Argox rechargeable battery pack is inserted in the
collector. If the collector with the battery pack is placed in the cradle, the
LED on the cradle will turn Orange first and turn to Green at once. When the
collector is placed in the cradle, the rechargeable battery pack will be
charged automatically.
collector. If the collector with the battery pack is placed in the cradle, the
LED on the cradle will turn Orange first and turn to Green at once. When the
collector is placed in the cradle, the rechargeable battery pack will be
charged automatically.
2.
If you have a spare Argox battery pack, you can replace the empty battery
pack with a full battery pack for continuous collector operation. And put the
empty battery pack in the charging slot of the cradle. The LED (CHG) on the
cradle will turn to Red in flashing and turn to Green again when the battery
is full.
pack with a full battery pack for continuous collector operation. And put the
empty battery pack in the charging slot of the cradle. The LED (CHG) on the
cradle will turn to Red in flashing and turn to Green again when the battery
is full.
When to replace or recharge the main battery
There are two conditions that you need to replace the main battery.
1.
As soon as possible after the battery indicator or “Battery Low” tip
appears on the display.
appears on the display.
2.
Before using the collector again, in case it has not been used for an extended
period.
period.
How to (re)place the main battery in the collector
Only use the batteries or battery pack as specified in the “Required
batteries” section.
1.
Retrieve the battery pack from the PT-10 or PT-12 by releasing the battery
unlock switch (Ref. 1).
unlock switch (Ref. 1).
2.
Battery unlock
switch
Ref. 1