Argox pt-10 Manuel D’Utilisation
31
5. Scanning
Please take care of the handling precautions.
Please make sure that the collector is installed according to the
installation instructions.
Never remove the main batteries (or battery pack) while the collector is
turned on. Doing so can cause data in the collector to be deleted.
The collector is LED illustration and not a laser product. However, we
recommend that you avoid looking directly into the LED light beam
emitter, or pointing the LED light beam directly into someone’s eyes.
Fit the bar code in the LED light beam from margin to margin and pass the scanner
downward over the bar code, as shown in the scan position illustration
downward over the bar code, as shown in the scan position illustration
Good read scan position
Incorrect read scan positions
5.1 How to read the barcode
The scanning sequence is defined by the user’s application. A typical sequence is:
Press the PW key
to turn power on.
Get into the System Tools\Scan Test and you will find the message on the
display:
<ScanTest>
Type:
Len:
<ScanTest>
Type:
Len:
Point the collector to the barcode and press the Trigger key
.