Argox pt-10 Manuel D’Utilisation
12
3.4 Installing, Replacing and Charging Batteries
Wrong use of batteries might cause serious damage to the collector or to the cradle. In
order to avoid damage, it is very important to take notice of the instructions.
Insert full batteries (or a full-charged battery pack) before use of the
collector.
Never remove the main batteries (or battery pack) while the collector
is turned on.
Doing so can cause data in the collector to be deleted.
When you do not use the collector for a long time, make sure the main
batteries (or battery pack) have enough capacity.
When there is not enough capacity in the main batteries (or battery pack),
the backup battery can not be charged and will become too low.
the backup battery can not be charged and will become too low.
Only use recommended batteries.
When other batteries are used, defects or other problems can occur. Before
installing (new) batteries please make sure you are using the recommended
batteries.
installing (new) batteries please make sure you are using the recommended
batteries.
Do not make a mistake regarding the polarity (+, -) of the battery.
The
collector
will
NOT work when the polarity is incorrect.
Use the right charger for batteries.
The rechargeable Ni-MH battery pack of Argox can be charged in the
cradle when either it is in the collector or alone to the charging slot in the
back of the cradle. Other rechargeable batteries need to be recharged in a
separated battery-charging device.
cradle when either it is in the collector or alone to the charging slot in the
back of the cradle. Other rechargeable batteries need to be recharged in a
separated battery-charging device.
Follow the instructions for installing, charging, and removing the
batteries very strictly.
The products are not warranted for damage, defects, malfunction, or loss of
data, resulting from incorrect use of batteries.
data, resulting from incorrect use of batteries.
Required batteries:
The collector needs both main battery and backup battery for operation.