Cadco bir-1c Mode D'Emploi

Page de 7
 
 
 
1
 
Buffet Induction Range 
Featuring Instant Heat & Pot Recognition 
 
Use & Care Manual - Model BIR-1C 
           
120 Volts – 1400 Watts – 11.7 Amps 
 
Congratulations on your purchase of Cadco’s Buffet Induction Range!  
You have chosen a very special range with the advantages of a Schott Ceran
®
 glass 
heating surface combined with a high-grade stainless steel casing featuring a unique 
design. Your new appliance is a high quality German product meeting the latest 
technological standards. 
IMPORTANT SAFEGUARDS 
To reduce the risk of personal injury or property damage when using electrical 
appliances, basic safety precautions should always be followed, including the following: 
 
1.  READ ALL INSTRUCTIONS BEFORE USE. 
2.  Do not touch hot surfaces! Always use hot pads or pot holders until unit cools. 
3.  To protect against electrical shock, do not immerse unit, cord or plug in water  or other liquid. Also make sure that no 
water or steam can infiltrate the underside. 
4.  Close supervision is necessary when any appliance is used by or near children. 
5.  Unplug from outlet when not in use and before cleaning. Allow to cool completely before putting on or taking off 
parts, and before cleaning or storing  the appliance. 
6.  Do not o
perate
 any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged 
in any manner. 
If cracks, fissures or breakage occur, immediately turn off the appliance and disconnect the plug.
 
Inappropriate repairs may result in considerable dangers for the user! 
Return the appliance to the Cadco Factory 
Service Department (call 860-738-2500 for Return Authorization first) for examination, repair or adjustment. 
7.  The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. 
8.  Do not use outdoors. 
9.  Do not let cord hang over edge of table or counter or touch hot surfaces. 
10. Do not place on or near a hot gas or electric burner or in a heated oven. 
11. Place unit on a heat-resistant, stable and plain working surface. The space above the appliance must be free and the 
distance from the wall must be at least 4” on all sides to ensure unhindered air circulation. 
12. Overheated fat or oil can ignite. This is why foods containing fat or oil must be prepared under supervision only. 
13. It is recommended that this appliance not be moved when the pot or pan on it contains hot oil or other hot liquid. 
14. Always turn any control to “OFF” before removing plug from wall outlet. 
15. Do not clean with metal scouring pads. They can scratch and ruin the finish of your unit. 
16. Do not use appliance for other than intended use. 
17. DO NOT COOK ON BROKEN COOKTOP. If glass cooktop should break, cleaning solutions and spillovers may 
penetrate the broken cooktop and create a risk of electrical shock. 
18. Clean cooktop 
with
 
caution. If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful t
o avoid 
steam burn. Some cleaners can produce noxious fumes if applied to a hot surface. 
19. Do not use cooking containers consisting of inferior enamel, synthetic material, china, or aluminum foil.  
DO NOT USE PLASTIC WRAP. 
20. Do not store any objects on top of the appliance. Do not use it as a worktop. 
21. 
Any damages resulting from non-observance of instructions in this manual will not be covered by warranty. 
 
SAVE THESE INSTRUCTIONS 
 NOTE: A short power supply cord (or cord set) has been provided to reduce the hazards resulting from becoming entangled 
in or tripping over a longer cord. Longer extension cords may be used if care is properly exercised in their use. If an extension 
cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the 
appliance. Also, the longer cord should be arranged so that it will not drape over the counter top or table top where it can be 
pulled on by children or tripped over accidentally. 
 
This unit is equipped with a grounded, 3-pronged commercial plug. For safety, this plug MUST be connected to a 3 
pronged outlet. Before connecting power, make sure the outlet’s voltage and frequency correspond to the data plate on 
the range (120 volts/60hz.) 
Only connect unit to alternating current (AC).