OKI C6150 Mode D'Emploi

C6150 User’s Guide

142

     

     

      

If the Ultra Heavy setting does not give proper toner fusion, 

you can try the Label settings.

Clean LED head with lens cleaner or soft tissue.

Change toner cartridge.

Change image drum.

Paper has been 
affected by static 
electricity.

Store paper within specified temperature and 
humidity levels.  See “Specifications” on 
page 112.

Paper is too thick.

Use recommended paper.  See “Paper (Print 
Media)” on page 16.

Toner is low.

Replace toner cartridge.  See “Replace a Toner 
Cartridge” on page 65.

Media Weight and 
Media Type settings 
may not be 
appropriate.

Set the value of media weight in the menu to 
the next heaviest one (MEDIA MENU  → YYY 

MEDIA WEIGHT).

Packing materials were 
left on the fuser when 
it was installed.

Careful! Fuser my be HOT!
Open the top cover and check to be sure that 
all the packing materials were removed from 
the fuser. See “Replace the Fuser” on page 81.