Philips 190S6FG Manuel D’Utilisation

1

Turn off your computer and unplug its power cable (1).

2

Connect the VGA signal cable to the video connector (2) on the 
back of your computer. Secure the cable by turning the screws on 
the connector clockwise.

3

Connect the serial (female RS-232) cable to the serial port on the 
back of your PC (3). Secure the cable by turning the screws on the 
connector clockwise.

4

Disconnect the male PS/2 connector from the keyboard port of the 
PC  and connect it to the female PS/2 connector of the flying lead 
from the serial (female RS-232) cable (4). 

5

Plug the male PS/2 connector of the flying lead from the serial 
(female RS-232) cable in the keyboard port of the PC (5). 

6

Connect the speaker connector to your PC audio output (6).

7

Plug the power cord of the touch screen monitor and your 
computer into an outlet (7).

8

Turn on your computer and touch screen monitor. If the monitor 
displays an image, the installation is complete.

9

If the image is not centered within the screen area, use the monitor 
controls to adjust the image. 
See chapter Basic Functions for more information.