DataVideo PD-1 Manuel D’Utilisation
7
DC Out 12V 7A
2 x 12V 7A DC Outputs. 1 x 2.1mm InLine Sockets (Centre Positive),
and 1 x 4 Pin XLR Socket (Pin 4 Positive, Pin 1 Ground)
and 1 x 4 Pin XLR Socket (Pin 4 Positive, Pin 1 Ground)
DC Out 12V 5A
1 x 12V 5A Output via 4 Pin XLR Socket
(Pin 4 Positive, Pin 1 Ground)
(Pin 4 Positive, Pin 1 Ground)
AC Outlet 1.5A 110V / 3A 240V
AC Outlet at same voltage as AC Input (110~120 / 220~240V
according to model)
N.B. Socket is redundant when PD1 is powered from DC
according to model)
N.B. Socket is redundant when PD1 is powered from DC
Ground Terminal
When connecting this unit to any other component, make sure that it is
properly grounded by connecting this terminal to an appropriate point.
When connecting, use the socket and be sure to use wire with a
crosssectional area of at least 1.0 mm2.
properly grounded by connecting this terminal to an appropriate point.
When connecting, use the socket and be sure to use wire with a
crosssectional area of at least 1.0 mm2.
Datavideo Product Voltage Requirements:
This table is a guideline for Datavideo Products, if you are using products from other
manufacturers please check their voltage requirements carefully before connecting to the
PD1.
manufacturers please check their voltage requirements carefully before connecting to the
PD1.
DC 5V 1A
DAC200, DAC100
DC 12V 2A
BAC03, VP332, DAC15, DAC10, DAC6, DAC5, TLM70D, TLM404,
TLM700, TLM702, TLM350, SE500, DVK100, RMC140, ITC100,
STC100
TLM700, TLM702, TLM350, SE500, DVK100, RMC140, ITC100,
STC100
DC 12V 4A
DN100, CP100, DAC30
DC 12V 5A
MP6000,
DC 12V 7A
SE800, SE800AV