Garmin 520 Mode D'Emploi
GPSMAP
®
500 Series Owner’s Manual
5
G
ettInG
S
tarted
Viewing System Information
You can view your unit’s software version, basemap version, and
unit ID number. You may need this information to update the system
software or purchase additional map data information.
From the Home screen, select
From the Home screen, select
Configure
>
System
>
System
Information
.
Restoring Factory Settings
You can restore your unit to the original factory settings.
CAUTION: This procedure deletes any information you have
entered.
To restore factory settings:
1. From the Home screen, select
Configure
>
System
>
System Information.
2. Select
Factory Settings
.
3. Select
Yes
to restore all factory settings. Otherwise, select
No
to cancel.
Inserting and Removing SD Cards
Your unit supports Secure Digital (SD) cards. Insert optional
BlueChart
®
g2 Vision
™
SD cards to view high-resolution satellite
imagery, and aerial reference photos of ports, harbors, marinas and
other points of interest. Insert blank SD cards to transfer data such as
waypoints, routes, and tracks to another compatible Garmin unit or a
PC. The SD card slot is located on the bottom-right corner of the unit.
To insert the SD card, press it in until it clicks.
To insert the SD card, press it in until it clicks.
To remove the SD card, press in on the SD card. The card pops out.
NOTE: If using a new, blank SD card to transfer waypoints
from MapSource, insert it in your GPSMAP 400/500 series unit
before copying the files from your PC. This prepares the card.