Garmin 300 Manuel Du Propriétaire

a

ppendIx

For convenience, a carabiner clip comes with the 

Colorado. 

1.  Position the carabiner clip in the slots on the 

mounting spine of the Colorado.

2.  Slide the clip up until it locks in place.
3.  To remove the carabiner clip, lift the bottom of the 

clip and gently push down on the carabiner clip until 

it releases.

Clean the outer case (except for the screen) using a 

cloth dampened with a mild detergent solution, and 

then wipe it dry. Avoid cleaners that may damage the 

plastic components.

Clean the Colorado screen using a soft, clean, lint-free 

cloth. Use water, isopropyl alcohol, or eyeglass lens 

cleaner. Apply the liquid to the cloth, and then gently 

wipe the screen with the moistened cloth.

After prolonged use, the Colorado Rock ‘n Roller may 

become sticky and difficult to rotate.

1.  Remove the Rock ‘n Roller knob by gently taking 

it off the Colorado, using a small coin or your 

thumbnail.

2.  Wash the knob and the inside of the housing with 

water. Let them dry completely.