Garmin 3600 Mode D'Emploi

1.  On the Windows taskbar on your computer, click 

Start, choose Settings, and then choose Control Panel.

2.  Double-click 

Infrared.

3.  Click the 

Options tab.

4.  Select 

Enable infrared communication.

  The COM port displayed in the drop-down box is the port where your infrared device is attached. It should be differ-

ent from any port used by the HotSync

®

 Manager.

5.  Make a note of which port is listed as “Providing application support.” You need this information to configure the Hot-

Sync Manager for infrared communication. This port is the simulated port. It is the channel through which the actual 

infrared communication takes place between your computer and your handheld. 

6.  Deselect all other check boxes in the Options tab.
7.  Click 

Apply, then click OK.

Next you need to go to the HotSync Manager and specify that the infrared port should be used for the HotSync operation.

1.  Click the 

HotSync Manager icon in the Windows system tray.

2.  Make sure 

Local is checked on the menu.

3.  Choose 

Setup.

4.  Click the 

Local tab.

5.  In the Serial Port drop-down box, select the COM port that was given as the simulated port in the Options tab of the 

Infrared Monitor.

6.  Click 

OK.