Garmin 300 Mode D'Emploi

a

PPendix

For a tight grip, clean and dry your windshield before mounting the 
suction cup. 

1. Plug the small end of the cable into the back of the mount; 

plug the other end into a power receptacle in your vehicle.

2. Place the suction cup on the windshield. 
3. Flip the lever back, toward the windshield. 
4. Open the antenna. Fit the bottom of your nüvi into the cradle.
5. Tilt your nüvi back until it snaps in place. If necessary, rotate 

the cradle. 

➋

➌

➍

➎

➊

Check your state and local traffic 
laws before mounting. Currently, 
state laws in California and 
Minnesota prohibit drivers from 
using suction mounts on their 
windshields while operating 
motor vehicles. Other Garmin 
dashboard or friction mounting 
options should be used. See 
the product information sheet 
that came in the box for more 
information.