Garmin 660 Manuel De Montage

Warning: Incorrectly wiring the power cable with bare wire leads can result in 

damage to the vehicle or the battery and can cause bodily injury. Garmin strongly 

recommends having an experienced installer with the proper knowledge of electrical 

systems install the unit.

  See the Important Safety and Product Information guide in the product box for product warnings 

and other important information.

Select a suitable and secure location to mount the zūmo on your motorcycle, based on 

available power sources and safe cable routing.

The zūmo includes parts for two handlebar installation solutions. Custom mounts can 

1.  Place the U-bolt around the handlebar, and thread the ends through the handlebar

base.

2.  Tighten the nuts to secure the base. Do not overtighten.

note: The recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in.