Manualsbrain.com
  1. Manuels
  2. Marques
  3. Raritan
  4. P2-UMT832M
  5. Manuel De Montage

Raritan P2-UMT832M Manuel De Montage

Télécharger
Page de 6
 
Paragon II QSG 
4
QSG-P2-0K-v4.6-E 
y 255-30-6010-00 
 
7.  Set a unique Stacking Unit ID on the front panel of each 
Stacking Unit. 
a. Press 
the 
FUNC button to activate the Function Menu. 
b. Press 
the   and   buttons to select "Set Stack ID." 
c. Press 
the 
ENT button to confirm your selection. 
d. Press 
the   and   buttons to assign the numeric ID. 
The guideline of ID assignment is: 
ƒ  Assign 1 as the ID for the first Stacking Unit, which is 
directly connected the Main Unit. 
ƒ  Assign 2 as the ID for the second Stacking Unit, 
which is connected to the first Stacking Unit. 
ƒ  Assign 3 as the ID for the third Stacking Unit, which 
is connected to the second Stacking Unit. 
e. Press 
the 
ENT button to save the setting. 
8.  Turn OFF all Paragon II devices. 
9.  Turn on the Stacking Unit first. If there are multiple Stacking 
Units, turn on the Stacking Units from the last one to the first 
one in sequence. 
10. Turn on the Main Unit. 
 
Step (B): Connect User Stations 
 
To connect one or more user stations 
1.  Connect a user station to the Main Unit. 
a.  Plug one end of a Cat5 UTP cable into User Port 
number 1 on the back of the Main Unit. 
b.  Plug the other end of the cable into the RJ45 port on the 
back of the user station. 
 
2.  Connect a power cord to the user station and turn it on. 
3.  Connect a PS/2 or USB keyboard, mouse, and a VGA 
monitor to the user station. 
 
Note: P2-EUST/C provides USB ports only for keyboard 
and mouse. 
4.  Turn on the monitor. 
5.  Repeat Steps 1 to 4 for all other user stations you want to 
connect to remaining User Ports. 
The user station does not support the use of a VGA-to-DVI 
converter. 
 
Step (C): Connect Servers 
 
To connect one or more servers 
1.  Connect a Paragon II CIM to the Main or Stacking Unit. 
a.  Plug one end of a Cat5 UTP cable into Channel Port 
number 1 on the back of the Main Unit or any connected 
Stacking Unit. 
b.  Plug the other end of the cable into the RJ45 port of the 
CIM. 
 
2.  Depending on the CIM model you purchased, plug the 
connectors of the CIM into a server's PS/2 or USB keyboard, 
mouse, and VGA ports. 
 
Tip: If the server provides a DVI-D connector instead of a 
VGA port, Raritan recommends that you connect the CIM 
to the server using a Smart View DVI-to-VGA (female to 
female) converter (DV-101). Note that currently only the 
Smart View DVI-to-VGA converter has been tested and is 
officially supported by Raritan for use with Paragon II. 
3.  Turn on the server. 
4.  Repeat Steps 1 to 3 for all other servers you want to 
connect to remaining Channel Ports. 
 
QS Rule