Thetford 1210 Manuel De Montage

Installation Manual 3

-  This refrigerator is not approved for use as a free standing refrigerator.  It is equipped for the use of propane gas only and can 

not be changed to use any other fuels (natural gas, butane, etc.).

-  Incorrect installation, adjustment, alteration, or maintenance of this refrigerator can cause personal injury, property damage, or 

both.

-  Obey the instructions in this manual to install intake and exhaust vents.

-  Do not install the refrigerator directly on carpet.  Put the refrigerator on a metal or wood panel that extends the full width and 

depth of the refrigerator.

-  Do not allow anything to touch the refrigerator cooling system.

-  Propane gas can ignite and cause an explosion that can result in property damage, personal injury, or death.  Do not smoke or 

create sparks.  Do not use an open flame to examine the propane gas supply line for leaks.  Always use two wrenches to tighten 

or loosen the propane gas supply line connections.

-  Make sure the electrical installation obeys all applicable codes. See “Certification and Code Requirements” section.

-  Do not bypass or change the refrigerator’s electrical components or features.

-  Do no

and can cause a shock hazard, electrical shorts, and in some cases fire.

-  The refrigerator cooling system is under pressure.  Do not try to repair or to recharge a defective cooling system.  

-  The cooling system contains sodium chromate.  The breathing of certain chromium compounds can cause cancer.  The cooling 

system contents can cause severe skin and eye burns, and can ignite and burn with an intense flame.  Do not bend, drop, weld, 

move, drill, puncture, or hit the cooling system.

-  The rear of the refrigerator has sharp edges and corners.  To prevent cuts or abrasions when working on the refrigerator, use 

caution and wear cut resistant gloves.

-  Make sure that the refrigerator is stored in a location so that it is not exposed to the elements of the weather.

This refrigerator is certified by CSA International as meeting the 

latest edition of ANSI Z21.19 / CAN 1.4 standards for installation 
in mobile homes or recreational vehicles.

The installation must obey these standards and this “Installation 

Manual” for the NORCOLD limited warranty to be in effect.  

Installation must conform with the following as applicable:

Art01290