KitchenAid KESS907SSS Manuel D’Utilisation
9
10. Move range into its final position making sure rear leveling leg
slides into anti-tip bracket.
11. Continue installing your range using the following installation
instructions.
Electrical Connection - U.S.A. Only
Power Supply Cord
Direct Wire
1. Disconnect power.
2. Remove the terminal block cover screws located on the back
of the range. Pull cover down and toward you to remove
cover.
cover.
3. Add strain relief.
Style 1: Power supply cord strain relief
■
Remove the knockout for the 40-amp supply cord.
■
Assemble a UL listed strain relief in the opening.
■
Feed the power supply cord behind the black horizontal
cross brace and through the strain relief, allowing enough
slack to easily attach the wiring to the terminal block.
cross brace and through the strain relief, allowing enough
slack to easily attach the wiring to the terminal block.
■
Tighten strain relief screw against the power supply cord.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
A. Hold-down screws
B. Terminal block cover
B. Terminal block cover
A. UL listed strain relief
A. Black horizontal cross brace
B. Power supply cord
B. Power supply cord
A
B
A
B
A