Aethra avc8500 Mode D'Emploi

 

31 

General 
This menu contains the following configuration settings: 

•  Mute 

selected, at the start-up and after each disconnection system will not transmit audio, an icon will be displayed in the 
local and remote terminals. 

•  Do Not Disturb 

selected, at the start-up and after each disconnection system will not accept incoming calls, an icon will be displayed 
in the local terminal. 

• 

Once in connection. 
To activate the Video Privacy function, press the “VIDEO PRIVACY” key on the remote control. Local video will no 
longer be transmitted. 

The icon 

 will appear in the video window indicating that the remote terminal is no longer receiving video from 

local terminal. 

Not in connection  
Activates/Deactivates: 

Video privacy as above. 

Do Not disturb System does not answer to incoming calls (busy for the remote) 

•  Confirm disconnection 

Enable/disable confirmation requests for call disconnection. 

•  Enable Tones 

Enable/disable tones in phase of call. 

•  Automatic answer: 

Enable/disable the automatic answer function, after the selected number of rings. 

H.320 
This menu contains the following configuration settings: 

•  Audio Number = Video Number: 

In a non-aggregated ISDN call, the audio number may be different from the video number. If this checkbox is not 
selected, the Codec will request the video number and offer by default the same number as the one used by audio. 

•  Additional Calls: 

Select automatic or manual configuration of additional calls 

•  Mode: 

Allows you to set the call mode to 64K or 56K. 

•  TCS4 Delimiter 

definition of  TCS4 calls delimiter: “#” or “*”.   TCS4 is a special routing method for direct video call 
when a Gateway is present on the network (ISDN network to IP network). To place a call using a TCS4 
extension, do the following: 

1.  Obtain the following information: Gateway number, delimiter and TCS4 extension. 
2.  Dial the Gateway number, the delimiter and the TCS4 extension. 

Example:   ISDN_Gateway_number# TCS4_extension. 

Broadcast 
This menu contains the following configuration settings: 

• 

This option allows you to set a transmission as “broadcast” (without capabilities exchange).