Aethra avc8500 Mode D'Emploi
57
Location
From the Home Page, select:
1. SETTINGS
2. INSTALLATION
3. LOCATION
2. INSTALLATION
3. LOCATION
The following page will be displayed:
This section contains regional data about the terminal:
Terminal Name: Enter a name for the terminal
Country Name: Select the country. An international country code will be automatically provided.
Language: Select the desired language.
PBX: Enter the PBX access number for an outgoing call.
Audio Coding: Select the type of audio encoding in “Transmission.”
Video Standard: Select the video standard (PAL/NTSC), depending on the peripheral connected to Video Out.
Selection Tone: Select the desired tone.
Camera Frequency: <Auto> or 50Hz (NTSC).
Load Default Settings
From the Home Page, select:
1. SETTINGS
2. INSTALLATION
From here, the default Codec configuration can be reloaded.
There are two options:
There are two options:
• User settings only
• Factory Defaults
Once selected the desired option from the dropdown menu, move to the “LOAD DEFAULT VALUES” icon and press OK.
Read all instructions carefully.
If the “FACTORY SETTINGS” option has been chosen, users will be asked, as a precaution, for confirmation. An affirmative
answer will result in the factory settings being reloaded. All user settings and data will be lost, including call history, phonebook
numbers and static IP addresses.
If the “FACTORY SETTINGS” option has been chosen, users will be asked, as a precaution, for confirmation. An affirmative
answer will result in the factory settings being reloaded. All user settings and data will be lost, including call history, phonebook
numbers and static IP addresses.