Aethra d2001 nx Manuel D’Utilisation
ISDN TESTER AND ANALYZER D2001
NX
USER’S MANUAL
B channel data connected to the internal audio circuit.
B channel data connected to the external HANDSET plug.
Incoming call (only if the answer has been set in manual
mode).
mode).
Active loop.
BER test in progress.
In Simulation mode you can select the looped B channels and display the connected
remote number in the last line of the screen of page 2 , if available. If the delay is
available for the selected channel (see Chapter 3.4.4), the instrument displays it in
alternation with the connected number. Press ENTER on the selected channel to
disconnect the associated call.
remote number in the last line of the screen of page 2 , if available. If the delay is
available for the selected channel (see Chapter 3.4.4), the instrument displays it in
alternation with the connected number. Press ENTER on the selected channel to
disconnect the associated call.
In Monitor mode you can select the B channels with activity and display the
connected remote number in the last line of the display, if available. Press ENTER on
the selected channel to listen to the audio of the associated call.
connected remote number in the last line of the display, if available. Press ENTER on
the selected channel to listen to the audio of the associated call.
In Monitor mode information on the B channel is only given with
the 'MONITOR' test in progress and only refers to the
connections established after the START.
the 'MONITOR' test in progress and only refers to the
connections established after the START.
3
Selects a B channel and displays the connected number.
4
Disconnects the call associated to the B channel.
Simulation mode only.
Simulation mode only.
4
Listens to the audio of the associated call. Monitor mode
only.
only.
80
CHAPTER 6 - SMART STATUS