Aethra avc500 Mode D'Emploi
Video Input Management
It is possible to manage different video inputs by selecting them using the remote control keys “Camera”. The function keys
“Red”-“Yellow”-“Camera”, can be configured to be associated with any available video input.
Possible choices include:
“Red”-“Yellow”-“Camera”, can be configured to be associated with any available video input.
Possible choices include:
Room camera
XGA Video input
A camera connected to a supplementary video input
VCR video
Note
The desired video source must be connected to the System inputs on the back of the equipment beforehand. For a correct
setup of the function keys, see the chapter “Audio-Video-Data”, section “Camera”.
During a connection it is also possible to control not only the local video camera’s zoom and panning functions but also those
of the remote camera (if enabled). Use the remote control key “Far/Near” to select remote or local camera.
During a connection it is also possible to control not only the local video camera’s zoom and panning functions but also those
of the remote camera (if enabled). Use the remote control key “Far/Near” to select remote or local camera.
Field of View and Zoom
From the Home Page, using the remote control, go to the “video window” and press OK.
Adjust the video camera’s field of view with the arrow keys and press OK on the remote control.
From the Home Page, using the remote control, go to the “video window” and press OK.
Adjust the video camera’s field of view with the arrow keys and press OK on the remote control.
An alternate method:
From the Home Page, go to the “Magnifier” icon on the status bar and press OK. You will see a full screen display with the
camera under your control.
To release camera control, press OK.
From the Home Page, go to the “Magnifier” icon on the status bar and press OK. You will see a full screen display with the
camera under your control.
To release camera control, press OK.
Video Privacy
Once in connection.
To activate the Video Privacy function, press the VIDEO PRIVACY key on the remote control. Local video will no longer be
transmitted.
To activate the Video Privacy function, press the VIDEO PRIVACY key on the remote control. Local video will no longer be
transmitted.
The icon
will appear in the video window indicating that the remote terminal is no longer receiving video from local
terminal.
Not in connection
Activates/Deactivates:
Activates/Deactivates:
Video privacy as above.
Not do disturb System does not answer to incoming calls (busy for the remote)
Not do disturb System does not answer to incoming calls (busy for the remote)
Controlling audio
The “VOLUME (
+
and
-
)” keys allow you to adjust the level of received audio.
By pressing MUTE key you can activate the mute function, that is local audio will no longer be transmitted. On both the local
and remote displays, the icon
will appear, indicating that the mute function is active.
29