Visioneer XP 470 Mode D'Emploi
L
OAD
AND
S
CAN
D
OCUMENTS
25
L
OAD
AND
S
CAN
D
OCUMENTS
When you press either the Simplex or Duplex button, documents are
scanned using the scan settings indicated by the LED number. The
scanned images are then sent to a software application (known as the
Destination Application) or to a storage folder on your computer.
scanned using the scan settings indicated by the LED number. The
scanned images are then sent to a software application (known as the
Destination Application) or to a storage folder on your computer.
1. Make sure the output tray is fully extended, and adjust the paper
guide for the width of paper.
Note: Always remove any staples or paper clips from documents
before inserting them into the scanner. Staples and paper clips can jam
the feed mechanism and scratch the internal components. Do not scan
any document with labels, stickers or Post-It™ notes on the pages. If a
label, sticker or Post-It note comes off during the scanning process, the
item can get stuck in the scanner. Misuse as described here will void
your scanner’s warranty.
before inserting them into the scanner. Staples and paper clips can jam
the feed mechanism and scratch the internal components. Do not scan
any document with labels, stickers or Post-It™ notes on the pages. If a
label, sticker or Post-It note comes off during the scanning process, the
item can get stuck in the scanner. Misuse as described here will void
your scanner’s warranty.