Vinotemp vt-humidor Mode D'Emploi

Page de 8
5 
 
 
1 7 6 2 1   S o u t h   S u s a n a   R o a d ,   R a n c h o   D o m i n g u e z ,   C a l i f o r n i a   9 0 2 2 1  
i n f o @ v i n o t e m p . c o m  
 
 
Instruction On Installation  
 
Before using this product, please:  
• 
Remove all external and internal packaging. 
• 
Verify that the accessories are present: Cigar Drawer, Instruction Manual.  
• 
Place the product on a flat and stable surface. Screw or unscrew the 
adjustable feet for leveling.  
• 
Before connecting this product to the power source, place in the desired 
location and wait for 2 hours to avoid risk of cooling system malfunction. 
• 
Clean the inside of the unit with a soft cloth (do not use detergent or 
solvent). 
• 
Verify that the power cable is not damaged. If cord is damaged, have it 
replaced by an authorized technician.  
• 
It is recommended to install this unit in a room where the ambient 
temperature is not lower than 50°F or higher than 80°F. If the ambient 
temperature is not in this range, the inside temperature may not 
maintain the ideal temperature for your cigars. The inside temperature of 
the product also can vary if the inside indicator light is turned on or off.  
 
 
 
Use  
 
• 
Connect the unit to the power supply.  
• 
Set the temperature to 66°F. 
• 
Place cigars loose in the top drawer or place your box in the lower section. 
• 
To turn on/off the inside light, press the light button.  
 
 
 
Cleaning  
 
• 
Disconnect the power cord. 
• 
Clean the inside of cigar humidor with warm water and mild soap. Do not 
use abrasive detergent or solvents. Do not use moisture on the wood 
shelves as it can stain. Use mild window cleaner for the glass door, but do 
not use this cleaner for the door trim.  
• 
Don't put the shelf in the dishwasher.