Videolarm qsm75c3-70na Mode D'Emploi
- 5 -
!
Be sure the bracket is properly and securely mounted
to a supporting structure capable of rigidly holding
the weight of the entire unit.
to a supporting structure capable of rigidly holding
the weight of the entire unit.
installinG thE housinG assEMBlY:
installinG Wall Mount
ConnECtinG thE tRiM RinG assEMBlY to thE
housinG toP:
1. There is a safety lanyard that is attached to the inside of
the dome assembly. Take the open end of the lanyard and
loop it around the lanyard tab that is located inside the
housing top.
loop it around the lanyard tab that is located inside the
housing top.
2. The safety lanyard is now attached to the trim ring.
CaRE anD ClEaninG of DoMEs:
All SM75 units include an optically clear polycarbonate dome.
The dome is an optical device and should be handled with
extreme care. Leave protective film on dome until product is
fully assembled and installed. Even though the dome is virtually
unbreakable, it can be easily scratched.
The dome is an optical device and should be handled with
extreme care. Leave protective film on dome until product is
fully assembled and installed. Even though the dome is virtually
unbreakable, it can be easily scratched.
Clean only with a clean cotton cloth and warm water.
DO NOT use a strong solvent or cleanser!
2.000" MIN.
2.000
(Wall Mount WMSM7 Sold Separately)