VTech CS6429-2 Mode D'Emploi

40

The system provides voice prompts to guide you through recording 

announcement and remote access.

The answering system can record up to 99 messages, depending on the length 

of each message. Individual messages can be up to three minutes see page 38 

to change the length. The total recording time for the announcement, messages 

and memos is approximately 14 minutes. The actual recording time depends on 

individual message characteristics. Messages remain available for replay until 

you delete them. 
If the memory is full, the answering system announces,

 “Memory is full.” The 

number of messages and 

 flash alternately in the message window, and  

REC MEM FULL appears on the handset. You must delete some messages 

before recording new ones.

When there are new message (including memos),  

XX NEW MESSAGES and   display on handset, and the 

message window on the telephone base flashes. When you 

are reviewing a new message, 

 displays on the handset.

If the message alert tone is turned on, the telephone base 

beeps every 10 seconds when there are new messages.

If the answering system and call screening are on (see 

Call screening on page 37), 

the announcement and the incoming message broadcast at the telephone base when 

a call is answered by the answering system.
Options while recording a message:

Press

  /VOL  or  /VOL  on the telephone base to adjust the call  

screening volume.
Press     /

PLAY/STOP to temporarily turn on or off call screening.

Press 

/VOL  to temporarily turn on call screening when it is set to off.

•

•
•

HANDSET 1

2 NEW MESSAGES

3:15

PM

  12/25