VTech CS6429-2 Mode D'Emploi

Page de 76
51
Expand your telephone system
The handsets provided with your telephone system are already registered. Each 
handset is assigned a number that show on the handset display. Additional 
handsets registered to the telephone system are assigned in sequential order. 
For instance, if the telephone system already has 
HANDSET 1 and  
HANDSET 2, the new registered handset is assigned HANDSET 3. This 
telephone system accommodates up to five handsets.
Add and register a handset (optional)
You can add new handsets (
CS6409, purchased separately) to your telephone 
system. Each handset must be registered with the telephone base before use. 
When first purchased, each expansion handset shows 
1.PRESS FIND HS ON 
BASE 4 SEC and 2.THEN PRESS # ON HANDSET alternately. You may need 
to charge the handset before registering to the telephone base. For more details 
on battery charging, see the table on page 4.
To register a handset:
Place the unregistered handset in the telephone base or charger. If  
1.PRESS FIND HS ON BASE 4 SEC and 2.THEN PRESS # ON HANDSET 
do not appear alternately on the handset screen after a few seconds, remove 
the handset and place it in the telephone base or charger again.
On the telephone base, press and hold  /
FIND HANDSET 
for about four seconds until the red 
IN USE light on the 
telephone base turns on.
On the handset, press 
# (pound key) and the handset 
shows 
REGISTERING..... PLEASE WAIT. The handset 
shows 
HANDSET REGISTERED and you hear a beep 
when the registration process completes. It takes about 
60 seconds to complete.
  
1.
2.
3.
Appendix
If the registration fails, the handset shows 
REGISTRATION FAILED and 
then 
1.PRESS FIND HS ON BASE 4 SEC and 2.THEN PRESS # ON 
HANDSET alternately. Remove the handset from the telephone base and 
place it back in. Try the registration process again.
You cannot register a handset if any other system handset is in use.
To reset the telephone, unplug the power and the battery for a few seconds 
then plug them back in.
Only one handset can register to the telephone base at a time.