VTech CS6429-3 Mode D'Emploi

53

If you have difficulty with your telephone, please try the suggestions below.  

For customer service, visit our website www.vtechphones.com, or call  

1(800) 595-9511. In Canada, go to www.vtechcanada.com, or call  

1 (800) 267-7377. 
My telephone does not work at all.

Make sure the battery is installed and charged correctly (pages 3-4). For optimum daily 

performance, return the handset to the telephone base or charger after use.
Make sure that the power adapter is securely plugged into an outlet not controlled by a 

wall switch.
Make sure the telephone line cord is plugged firmly into the telephone base and the 

telephone wall jack.
Unplug the electrical power to the telephone base. Wait for approximately 15 seconds, 

then plug it back in. Allow up to one minute for the cordless handset and telephone 

base to synchronize.
Charge the battery in the handset for up to 10 hours.
If the battery is completely depleted, it may take up to 30 minutes to charge the handset 

before 

 appears on the screen (page 4).

Remove and install the battery again. If that still does not work, it may be necessary to 

purchase a new battery.
Disconnect the telephone base from the telephone wall jack and plug in a working 

telephone. If the other telephone does not work, the problem is probably in the wiring or 

the local telephone service. Contact your telephone service provider.

Try all the above suggestions.
Move the cordless handset closer to the telephone base. It may be out of range.
The telephone line cord may be defective. Install a new telephone line cord.
Disconnect the telephone base from the telephone wall jack and connect a different 

telephone. If there is no dial tone on this telephone either, the problem is in your wiring 

or local telephone service. Contact your telephone service provider (charges may apply).

Try all the above suggestions.
Make sure there is a dial tone before dialing. It is normal if the handset takes a second 

or two to synchronize with the telephone before producing a dial tone. Wait an extra 

second before dialing.
If other telephones in your home are having the same problem, the problem is in the 

wiring or local telephone service. Contact your telephone service provider (charges  

may apply).

•

•

•

•

•
•

•

•

•
•
•
•

•
•

•