VIZIO E190VA Mode D'Emploi

19

E190VA / E220VA / E260VA

To adjust the screen aspect ratio:

1.  Press the 

MENU/OK button on the remote. The on-screen menu is 

displayed.

2.  Use the 

Arrow buttons on the remote to highlight the Wide icon and press 

OK. The Wide menu is displayed.

3.  Use the 

Left/Right Arrow buttons on the remote to highlight the screen 

mode you want to display, then press 

MENU/OK:

•  Normal preserves the content’s original aspect ratio. Since the 4:3 

aspect ratio is not large enough to fill the TV’s screen, black bars are 
added to the left and right of the display image.

•  Wide stretches a 4:3 aspect ratio picture to the edges of the screen. 

Since the picture is being stretched, the display image may appear 
distorted. If the program is already formatted for widescreen viewing 
(1.85:1 or 2.35:1), then black bars will appear on the top and bottom of 
the display image.

•  Zoom expands images with black bars to fit the screen.
•  Panoramic expands the display image to fill the screen. Images may 

appear wider than intended. If you are watching widescreen (1.85:1 
or 2.35:1) content, black bars will still appear on the top and bottom 
of the display image. 

•  Stretch expands the display image to fill the screen. Images may 

appear wider than intended. If you are watching widescreen (1.85:1 
or 2.35:1) content, black bars will still appear on the top and bottom 
of the display image. 

Adjusting the Audio Settings

Using the Audio Settings menu, you can adjust the following:

•  Enable or disable SRS TruSurroundHD

•  Enable or disable SRS TruVolume

•  Adjust the equalizer settings
•  Adjust bass and treble levels
•  Adjust speaker balance
•  Enable or disable the built-in speakers
•  Select the digital audio output mode
•  Change the audio language
•  Reset the audio settings

Enabling or Disabling SRS TruSurroundHD
TruSurround HD is a robust multichannel virtualization technology developed 
by SRS Labs that provides an enhanced listening experience unlike any other 
technology offered for a two speaker playback environment.

To enable or disable SRS TruSurroundHD:

1.  Press the 

MENU/OK button on 

the remote. The on-screen menu is 
displayed.

2.  Use the 

Arrow buttons to highlight 

Audio and press MENU/OK.

3.  Use the 

Arrow buttons to highlight 

SRS TruSurround HD.

4.  Press the 

Right/Left Arrow buttons to 

select 

On or Off and press EXIT.