VIZIO E190VA Mode D'Emploi
6
25
E190VA / E220VA / E260VA
Adjusting the Noise Reduction Setting
Noise reduction diminishes artifacts such as “blockiness” or “pixellation”. When
activated, the resulting picture usually has softer edges.
Noise reduction diminishes artifacts such as “blockiness” or “pixellation”. When
activated, the resulting picture usually has softer edges.
To adjust the noise reduction setting:
1. Press the
MENU/OK button on
the remote. The on-screen menu is
displayed.
displayed.
2. Use the
Arrow buttons to highlight
Picture and press MENU/OK.
3. Use the
Arrow buttons to highlight
Noise Reduction and press
MENU/OK.
MENU/OK.
4. Use the
Arrow buttons to highlight Off,
Low, Medium, or High, then press
MENU/OK.
MENU/OK.
5. Press
EXIT.
Enabling or Disabling Fast Response
Enabling the Fast Response setting can often improve PC and console gaming
experiences.
Enabling the Fast Response setting can often improve PC and console gaming
experiences.
To enable or disable Fast Response:
1. Press the
MENU/OK button on
the remote. The on-screen menu is
displayed.
displayed.
2. Use the
Arrow buttons to highlight
Picture and press MENU/OK.
3. Use the
Arrow buttons to highlight
Fast Response.
4. Use the
Left/Right Arrow buttons to
change the setting to
Off or On.
5. Press
EXIT.
Enabling or Disabling the Ambient Light Sensor
When enabled, the ambient light sensor detects the light levels in the room to
optimize the brightness of the TV’s backlight.
When enabled, the ambient light sensor detects the light levels in the room to
optimize the brightness of the TV’s backlight.
When the ambient light sensor is enabled, you will be unable to
manually change the TV’s brightness settings.
manually change the TV’s brightness settings.
To enable or disable the ambient light sensor:
1. Press the
MENU/OK button on
the remote. The on-screen menu is
displayed.
displayed.
2. Use the
Arrow buttons to highlight
Picture and press MENU/OK.
3. Use the
Arrow buttons to highlight
Ambient Light Sensor.
4. Use the
Left/Right Arrow buttons to
change the setting to
Off or On.
5. Press
EXIT.