VIZIO d1 Mode D'Emploi
BRAVO D1 User Guide
Page 17
.
VINC.COM
For composite video and S-Video output, make sure the HD Component and HD DVI options are
Off. Choose the TV system output (NTSC/PAL) that matches your TV’s capabilities.
If you turn the HD Component/DVI On with the TV hooked up via S-Video or composite video
connections, the on-screen menu will no longer be visible. If this happens, unplug the Bravo D1,
plug it back in, turn it on, and enter the following Remote Control command sequence:
plug it back in, turn it on, and enter the following Remote Control command sequence:
5. Press Setup to display the Setup menu.
6. Press d for the Video Settings option.
7. Press f once and then press d once to select the HD DVI Out
6. Press d for the Video Settings option.
7. Press f once and then press d once to select the HD DVI Out
option.
8. Press f once and then d to select OFF.
9. Press to confirm.
9. Press to confirm.
This should turn the HD Component/DVI option Off, and you will be able
to see the menu again.
Alternatively, you can select the output by using the TV Mode toggle.
Look at the display on the Bravo D1 and press the TV Mode button
repeatedly until the NTSC selection is lit.
repeatedly until the NTSC selection is lit.