VIZIO d1 Mode D'Emploi
BRAVO D1 User Guide
Page 1
.
VINC.COM
Warning
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
UNIT TO RAIN OR MOISTURE.
CAUTION: To reduce the risk of fire and electric shock, do not
remove the cover of this product. Refer all maintenance requests
remove the cover of this product. Refer all maintenance requests
to authorized personnel only.
This lighting flash symbol in a triangle alerts users to the
presence of non-insulated high voltage within the product's
presence of non-insulated high voltage within the product's
enclosure that presents an electrical shock hazard.
The exclamation point symbol in a triangle alerts users to the
presence of important operating and maintenance instructions in
presence of important operating and maintenance instructions in
the literature accompanying this product.
The mark, displayed on the rear panel of the unit, indicates that
the unit is a Class 1 device that uses lasers. No radiation hazard
the unit is a Class 1 device that uses lasers. No radiation hazard
exists.
Read through this User Guide before installing and using the Bravo D1.
Only qualified personnel should service the Bravo D1.
Do not touch the power plug with wet hands.
Pull the plug, not the cord, to disconnect the Bravo D1 from an electrical outlet.
Turn the main power off when the Bravo D1 is not in use. Disconnect the power
plug if you do not intend to use the Bravo D1 for a long period of time.
Before moving the Bravo D1, first remove the disc from the unit's tray.
Do not open the cover or touch any of the components inside the unit.
Do not install or operate the unit when it is directly exposed to sunlight or other
objects that radiate heat -- the Bravo D1 may overheat and malfunction.
Install the Bravo D1 in a cool, dry location. High moisture and humidity may
damage the laser head.
Install the Bravo D1 on a flat surface with good air circulation. Do not cover or
obstruct the ventilation holes on the unit in any way -- the Bravo D1 may
overheat.
overheat.
Clean the Bravo D1 by wiping the panel and case with a soft dry cloth. Do not
apply any kind of thinner, alcohol or sprays.