VIZIO E470VLE Mode D'Emploi

18

E470VLE

Adding New Channels
Occasionally, you may need to add a new analog channel or add a new range of 
channels. You can do this by using the Partial Channel Search and Add Analog 
Channel options.

To add a range of new channels:

1.  From the Settings menu, highlight 

Partial Channel Search. The Partial 

Channel Search menu is displayed.

2.  Highlight 

Scan Mode and select the type of channel you are adding: 

Analog, Digital, or Analog/Digital.

3.  Highlight 

From Channel and enter the channel from which you want to 

begin the scan. (Use the 

Number Pad on the remote to enter the channel.)

4.  Highlight 

To Channel and enter the channel to which you want to end the 

scan. (Use the 

Number Pad on the remote to enter the channel.)

5.  Highlight 

Start and press OK. The partial channel search begins.

6.  Wait until the partial channel search is 100% complete. Highlight 

Done and 

press 

OK.

7.  Press the 

EXIT button on the remote.

To add a single new analog channel:

1.  From the Settings menu, highlight 

Analog Channel. The Add Analog 
Channel menu is displayed.

2.  Highlight 

Enter Channel # and use the 

Number Pad on the remote to enter 
the number of the channel you are 
adding.

3.  Highlight 

Add Channel and press OK. 

The TV scans for the channel. 

4.  When the TV is done scanning for the 

channel, press the 

EXIT button on the 

remote.

Skipping Channels
After a channel scan is completed, you may find that some channels are too weak 
to watch comfortably. There may also be some channels you do not want to view. 
You can remove these channels from the TV’s memory with the Skip Channel 
feature.

Channels that have been removed with the Skip Channel feature can 
still be viewed if the channel is entered using the Number Pad. If 
you wish to completely block a channel from being viewed, use the 
parental controls. See 

To remove a channel:

1.  From the Settings menu, highlight 

Channel. The Skip Channel menu is 
displayed.

2.  For each channel you wish to remove, 

use the 

Up/Down Arrow buttons on 

the remote to highlight the channel and 
press 

OK. An X appears to the right of 

each channel you select.

3.  When you have selected all of the 

channels you wish to remove, press 
the 

EXIT button on the remote.