VIZIO M421VT Mode D'Emploi

VIZIO M421VT User Manual

www.VIZIO.com

Connecting Coaxial (RF)

Using Your Antenna or Digital Cable for Standard or Digital TV

1. Turn off the power to your HDTV.
2. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV

CABLE/ANTENNA connector on your HDTV.

3. Turn on the power to your HDTV.
4. Select

TV using the INPUT button on the remote control or side of the TV.

5. Search for new channels. See Auto Channel Search on page 43 for more information on

scanning for channels.

Connecting Your VCR or Video Camera

Note:

Refer to your VCR or Video Camera user manual for more information about the video output

requirements of the product.

1. Turn off the power to your HDTV and VCR or video camera.
6. Connect the yellow AV cable from your VCR or video camera to the Y/V jack (green/yellow

connector) on your HDTV.

2. Connect the audio cables on your VCR or video camera to the corresponding L and R AUDIO

jacks on your HDTV.

3. Turn on the power to your HDTV and VCR or video camera.
4. Select AV using the INPUT button on the remote control or side of the TV.

Note:

You can use your HDTV Component input to accept A/V signal (Composite) from a source

with A/V out, please plug your video signal (yellow connector) into the Component input (green
connector) and match up the audio connectors (R and L) for the sound. Expect to see a
black/white video in the Component input, if it is selected by accident.