VTech DS6151 Mode D'Emploi

67

L1)NO LINE

There is no telephone line connected on line 1.

L2)NO LINE

There is no telephone line connected on line 2.

Line 1 Incoming call

There is an incoming call on line 1.

Line 2 Incoming call

There is an incoming call on line 2.

Microphone ON

MUTE is turned off and the person on the 

other end can hear you. 

Microphone off

You have turned off the handset microphone. 

The other party cannot hear you but you can 

hear the other party. 

No signal, call ended

Communication between the system handset 

and telephone base is lost during a call.

Not available at this time

One system handset or the telephone base is 

already viewing the call log or directory and 

another handset/telephone base attempts to 

review it.

Out of range OR
no power at base

The system handset cannot communicate with 

the telephone base. Check the telephone base 

power connection or move closer.

Paging all handsets

The telephone base is paging handset(s).

**Paging**

The system handset is paged.

Place handset in charger

The battery is very low. Place the system 

handset in the telephone base for recharging.

Ringer muted

The ringer is muted temporarily during an 

incoming call.

Saved      

Your selection has been saved.

Unable to call try again

You try to make an intercom call but the system 

handset/telephone base you are calling is in 

the directory, in the call log, on an outside call, 

or the system handset is out of range.

Unable to save

You try to save a caller ID entry with no name 

or number.