JVC gz-mg50 Manuel D'Instructions

Page de 72
24 
EN
Controls in this section
Manual Recording
About manual recording mode
This mode enables you to set the focus and 
screen brightness manually. You need to switch 
to this mode because auto recording mode, 
which adjusts these settings automatically, is 
selected by default.
To change to manual recording mode
Preparation:
● Set the power switch to 
.
● Select the file type (video or still image) using 
the MODE switch.
Press twice.
The  
indicator 
appears.
To return to the auto recording mode
Press the AUTO button so that the   indicator 
appears.
16:9 
The camera’s Full Range AF system offers 
continuous focusing ability from close-up to 
infinity. However, the correct focus may not be 
obtained, depending on the shooting condition. 
In this case, use the manual focus mode.
To cancel manual focus
Press 49 so that the 
 indicator 
disappears.
The shutter speed is automatically adjusted 
from 1/2 to 1/30 seconds. It enables recording 
with low light levels in dim locations.
The 
 indicator appears.
To cancel nightalive
Press 
 (NIGHT) so that the 
 indicator 
disappears.
Manual Focus
1
The  
indicator 
appears.
2
If you want to set the focus, press 49 
after selecting the correct focus.
Nightalive
NOTE:
It is recommended to use the tripod (
when recording with a slow shutter speed.
[0h56m]
16:9
Focusing on a close subject
Focusing on a distant subject
16:9
AUTO
Power Switch
MODE Switch
/
/
/
49
M6E8US.book  Page 24  Friday, June 9, 2006  6:05 PM