JVC gz-mg50 Manuel D'Instructions

Before cleaning, turn off the camera and remove the battery pack and AC adapter.

To clean the exterior
Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild soap 
and wring it out well before wiping. Then wipe again with a dry cloth.

To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage the monitor.

To clean the lens
Wipe gently with lens cleaning paper.

墌

● Performance of recording medium is poor. Use the 

Cleanup function [CLEAN UP] in the menu.

● The writing speed of recording medium is slow, or the 

recording medium is corrupted. Use an SD card that is 
guaranteed to operate.

● The recording medium was subjected to vibrations or jolts. 

Be careful not to subject the recording medium to 
vibrations or jolts.

● Appears when the built-in hard disk is full and recording is 

not possible. Delete unnecessary files.

● Appears when the SD card is full and recording is not 

possible.
Replace with new recording medium or delete 
unnecessary files.

–

● The data may not be recorded on the recording medium 

correctly. Try recording again.

● Otherwise, clean up the recording medium.

–

● The recording medium cannot be played back correctly. Try 

playback again.

–

● The operation is not available in the video mode.

–

● The drop detection function operated, and the power was 

turned off. The file that was being recorded may have been 
saved into the [EXTMOV] folder.

31
55

● Avoid using strong cleaning agents such as benzine or alcohol.

● Cleaning should be done only after the battery pack has been removed or other power units have been 

disconnected.

● Mold may form if the lens is left dirty.

● When using a cleaner or chemically treated cloth, refer to the cautions for each product.

M6E8US.book  Page 66  Friday, June 9, 2006  6:05 PM