JVC gz-mg50 Manuel D’Utilisation

Page de 101
MANAGING FILES
EN
 41
MasterPage: Menu_Right
You can copy or move still image files between 
the built-in hard disk (HDD) and SD card using 
the on-screen display.
Before proceeding to following steps, 
Make sure that SD card is inserted in the SD 
slot.
Make sure that enough free space is left in the 
copy/move destination medium.
1
Set the power switch to 
 or 
.
2
Press MENU. The menu screen appears.
3
Press 
/
 to select [REC MEDIA 
SETTING], then press 49.
4
Press 
/
 to select [COPY/MOVE], then 
press 49.
5
Press 
/
 to select [COPY] or [MOVE], 
then press 49.
COPY: Files are copied to the destination 
medium while leaving original files in the source 
medium.
MOVE: Files are moved to the destination 
medium while deleting original files (except 
read-only files) in the source medium.
6
Press 
/
 to select the direction of copy/
move, then press 
. (HDD ] SD or 
SD ] HDD)
To copy or move by selecting files
7
Press 
/
 to select [FILE], then press 49.
● The index screen appears.
8
Press 
/
/
/
 to select a desired file, 
then press 49.
● The check mark ( ) appears on the selected file.
● To select other files, repeat this step.
● The scroll bar can also be used with the zoom 
lever and 
/
. (
9
Press MENU to return to the previous screen.
10
Press 
/
 to select [EXECUTE], then 
press 49.
11
File transfer starts.
● To stop the file transfer, press 49, then select 
[EXECUTE] and press 49.
12
When [COPYING (MOVING) 
COMPLETED] appears, press 49 to finish the 
operation.
To copy or move all still image files in the 
recording medium
7
Press 
/
 to select [ALL].
8
Press 
/
 to select [EXECUTE], then 
press 49.
● If you want to cancel, select [CANCEL], then 
press 49.
9
File transfer starts.
● To stop the file transfer, press 49, then select 
[EXECUTE] and press 49.
10
When [COPYING (MOVING) 
COMPLETED] appears, press 49 to finish the 
operation.
Copying/Moving Still Image 
Files
M5E3PAL.book  Page 41  Tuesday, August 2, 2005  4:04 PM