JVC gz-mg50 Manuel D’Utilisation
– 13 –
MasterPage: Body
NOTES:
● If PowerDirector/PowerProducer/PowerDVD have
already been installed on the PC, uninstall them
before installing the provided software:
Video files captured with this camera can only be
handled on the provided software. Please install
and use the provided software (PowerDirector
Express NE, PowerProducer 2 Gold NE,
PowerDVD 5 NE).
before installing the provided software:
Video files captured with this camera can only be
handled on the provided software. Please install
and use the provided software (PowerDirector
Express NE, PowerProducer 2 Gold NE,
PowerDVD 5 NE).
● If you perform installation of a software that is
already installed, uninstallation will start. In this
case, perform the installation again after
uninstallation is finished.
case, perform the installation again after
uninstallation is finished.
● Windows Messenger has to been closed during
CyberLink DVD Solution installation. If it is running
during installation, [Information] screen appears.
during installation, [Information] screen appears.
To close Windows Messenger:
1) While holding [Ctrl + Alt] key, click [Delete]
key so that [Task Manager] appears.
key so that [Task Manager] appears.
2) Click [Processes] tab.
3) Select [msmsgs.exe].
4) Click [End process].
Connecting the USB cable
Connect the USB cable to copy still images and
video files in a recording medium to the PC.
video files in a recording medium to the PC.
1
To assure safety, make sure all units are
turned off before making any connections.
2
Use the USB cable to connect the camera
to the PC.
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
● When the USB cable is connected, turning on or off
the camera causes malfunctions of the PC.
● Connect the camera directly to the PC, not through
the hub.
● Do not use an extension USB cable.
Connections (Windows
®
)
Camera
To USB connector
PC
To USB connector
USB cable
M5E3_InstallGuide.book Page 13 Tuesday, August 9, 2005 3:18 PM